Best Sellers

INFORMATION

Cut to fit. These are durable, walkable skate guards that allow you to walk comfortably from your car all the way to the rink.

CONTENT

1 unit includes one pair for both feet.

SIZE

Free Size

Bauer FLY 30 Junior Skate (EE)

Bauer Skate Width Guide

D Width: This is the standard width for Bauer skates.

EE Width: This indicates a wider fit, suitable for players with wider feet.

VAPOR FLY30

Experience the feeling of flying with the VAPOR FLY30 skate. Built with two core values—comfort and performance—in mind, this skate boasts an exceptional fit that will make you never want to take them off. Comfortable ankle padding and a flexible, elastic boot ensure that long sessions on the ice with friends are more enjoyable than ever.

NHL-Level Edge Holder

The LIGHTSPEED EDGE Holder is an NHL player favorite, featuring a quick-release trigger that allows for easy steel replacement on the fly.

Pro-Style Tongue

The classic felt tongue design delivers a Pro-level feel and enhanced comfort on the ice.

Lightweight Construction

The light and flexible materials used in the boot provide a rigid structure and excellent support through every stride.

Accurate Foot Measurement

• Setup: Place a white sheet of paper on a flat floor.

• Trace: While wearing the socks you typically skate in, trace the complete outline of your foot with a pen.

• Measure: Always base your measurement on the size of your larger foot.

• Timing: For the most accurate result, we recommend measuring in the afternoon, as feet often swell slightly throughout the day.

Choosing Your Hockey Skate Size

• The Best Fit: The ideal skate size is achieved when, after fully lacing up, your toes lightly graze the tip of the skate boot without being curled or cramped.

• Junior Recommendation: For junior players, we generally recommend purchasing one size up from the measured size to allow for growth.

SIZE

Product Overview

You no longer have to struggle on your way to the pond or the rink with your skates. The Bauer Skate Bag is designed to easily transport your skates to any icy surface.

Key Features

• Spacious Interior Pocket: Designed to accommodate any size of skate.

• Durable Material: Constructed with tough 600D Polyester for longevity.

INFORMATION

The right skating socks are essential equipment for maximizing on-ice performance. TOEZZ Pro Skate features a reinforced sole, an extra ankle protection layer, and a flexible Lycra construction that keeps the socks securely in place for stable skating. The high-density knit evenly distributes pressure, meticulously engineered for the perfect balance of comfort, protection, and durability.

Key Features

• Reinforced Sole: Enhanced durability and superior arch support.

• Ankle Reinforcement: Additional layers for extra protection and stability.

• Lycra Precision Fit: Flexible structure ensures the socks stay perfectly in place.

• High-Density Knit: Provides uniform pressure distribution for elite comfort.

• 100% Made in Finland: Proudly manufactured at our local factory in Ylöjärvi.

Official Certification & Partnership

Developed and tested alongside professional athletes, this product is CE Certified. (ANSI Rating: A2 – Light to medium cut protection).

As an official product of Leijonat (the Finnish National Team), these socks are used in partnership with the Finnish Ice Hockey Association. A portion of the proceeds from every pair sold supports the continued growth and development of ice hockey in Finland.

MATERIALS

60% Polyester — Coolmax

38% Polyamide

2% Elastane

SIZE

• JR: Length 13cm | Diameter 7cm

• S/M: Length 11cm | Diameter 8cm

• L/XL: Length 13cm | Diameter 8cm

GUIDE

Care & Maintenance

• Wash: Machine wash up to 40°C

• Fabric Softener: Not recommended (Avoid use for best performance)

• Drying: Do not tumble dry. Air dry only.

PRICE

₩43,000 x 25 units = ₩1,075,000 >> 15% Discount = ₩913,750

CUSTOM

This is a custom-made product and takes approximately 14 days (excluding public holidays) for production and delivery. The schedule may vary depending on the order status.

Please send customization details through the shipping message. Please send logo files in AI or PDF format to the email below.

shootoutcustom@gmail.com

※ Due to the nature of customization, slight variations may occur.

The Utty features a 6-hook system designed to neatly dry and store all your gear, including helmets, gloves, and shoulder, elbow, and shin guards. The one-touch hanging structure allows for effortless setup and portability, making it perfect for team locker rooms, home use, or organizing gear in your vehicle.

Features

• 6 heavy-duty hooks for multi-item storage

• Open-air design for optimal moisture evaporation and drying

• One-touch hanging system for quick and easy setup

• High-durability webbing and premium hardware

• Available in 22 different colors

Product Features

• 360° Adjustment: Freely adjustable to fit the full contour of the head for a secure fit.

• Removable Forehead Pad: Ensures a comfortable and fresh fit.

• Performance Liner: Designed with features for temperature reduction and sweat absorption.

• Lightweight Foam Construction: Provides comfort even during extended periods of wear.

INFORMATION

This display mini helmet + sticker pack set is perfect for souvenirs and gifts.

Helmet stands will be back in stock soon.

Please feel free to contact us via chat for any inquiries.

CUSTOM

Production takes 2 to 7 days (excluding public holidays) from the date the design is confirmed. The schedule may vary depending on the current order volume.

HOW TO ORDER

1. Place your order.
2. Email your team logo (Illustrator .ai file) to: shootoutcustom@gmail.com (We may already have the logo, so please inquire before sending.)
3. Leave your custom details via chat.
4. Confirm the design after consultation.
5. Production and shipping.

SIZE

Approx. 13cm (W) x 17cm (L) x 13cm (H)

PRICE

Mini Helmet + Sticker Pack (1 Set): 49,000 KRW

10% discount for orders of 5 or more.

Example) 5 sets: 245,000 -> 220,500 (44,100 KRW per set)

NOTE

The helmet and stickers are shipped separately. You must apply the stickers yourself. The stickers are a dry-transfer type and may peel off due to friction. (Please display the helmet after applying them carefully.)

CONTENT

Helmet

Sticker Pack : 2 Logos (Sides), 2 Messages (Sides), Large Number (Back), Name (Front), Small Number (Front)

INFORMATION

Constructed with durable materials, Blue Sports Treck Skate Guards securely protect your blades while preventing moisture buildup and damage during transport.

CONTENT

• Youth : Skate Size 11 ~ 13.5

• Junior : Skate Size 1 ~ 5

• Senior : Skate Size 6 ~ 9

INFORMATION

The POWERFOOT Performance Insert is a simple yet powerful upgrade that attaches to the underside of your skate's toe cap. It stabilizes your toes and enhances responsiveness for a more connected feel. Experience explosive starts, powerful crossovers, and more efficient strides. This patented product is a top-seller in Canada, frequently selling out every season.

How It Works & Performance Boost

By filling the empty space (negative space) inside the toe cap, the insert stabilizes the toes and maximizes "toe snap" at the end of each stride. In controlled environment testing, players reported a 5–10% reduction in the number of strides required to cover the same distance, leading to significant energy savings.

Fit & Comfort

Most players report that their skates feel significantly more comfortable with the inserts than without. It creates a snug, custom-fit feel across the top of your toes.

Plantar Fasciitis & Bone Spurs

By limiting unnecessary toe movement and "scrunching," these inserts may help reduce irritation and lower the risk of aggravating symptoms related to plantar fasciitis or bone spurs.

Compatibility

Compatible with all major skate brands, including Bauer, Reebok, CCM, Easton, Mission, ITECH, and Graf. They are also highly effective in low-profile skates like the Easton Mako.

Goalie Skates

The inserts provide more explosive power during lateral pushes and help reduce unnecessary foot movement inside the boot during butterfly transitions. Many goalies have reported that their skates feel significantly more comfortable after installation.

SIZE

Y13 – JR5.5 → Junior SR6 – 12.5 → Adult (Senior)

Thickness is adjustable using the included thin shims (Common for both JR/SR).

FIT & COMFORT

Finding the Perfect Fit

Ideal Fit A proper fit should feel like the insert is comfortably wrapping your toes, allowing for approximately 3mm of movement.

If Too Tight

• Check Positioning: Re-verify the placement inside the toe cap.

• Remove Shims: Take out the included shims to create more room.

• Break-in Period: The foam will mold to your toe shape after 2–3 uses.

• Caution: If discomfort persists, discontinue use.

If Too Loose

• Add Shims: If there is more than 3mm of movement, add the included shims to fill the gap.

HOW TO INSTALL

1. Loosen Laces: Loosen the skate laces and pull the tongue up as far as possible.

2. Prep Surface: Ensure the underside of the toe cap is clean and completely dry.

3. Remove Adhesive Backing: Peel off the protective film from the back of the insert.

4. Attach & Secure: Align the insert with the underside of the toe cap and press down firmly to secure it.

5. Optimal Conditions: The adhesive bonds best when applied at room temperature.

※ For best results, allow 24 hours for the adhesive to fully cure before use.

NOTE

• During Sharpening: There is no need to remove the inserts when sharpening your skates.

• Heat Molding: We do not recommend heat molding after installation (high temperatures may damage the inserts).

• Removal: Due to the nature of the adhesive strips, the inserts may be damaged upon removal.

• After Use: Loosen the laces and pull the tongue open to allow for proper ventilation and drying.

• Cleaning: Use lukewarm water with a mild detergent. Air dry only.

INFORMATION

• Durable braided polyester for consistent tension and longevity

• Width: 1 cm (≈ 0.39 in)

Packaging style (Blue or Yellow) will be sent at random.

SIZE GUIDE

While many players choose one size up for easier tying, please refer to the guide below if you prefer an exact fit. (We recommend comparing the length with your current laces.)

INFORMATION

Dominate every shift and change the game with the all-new Sherwood Rekker Morph Pro, engineered for elite players. Boasting an ultra-lightweight design and lethal scoring power, the Rekker Morph Pro delivers rocket-like precision in handling, loading, and release. From its internal structure to its sleek aesthetics, this premium stick has everything you need to redefine pro-level play.

INTRODUCTION

SHOOTOUT Inline Puck

INFORMATION

The dual-structure design, featuring both an elastic waistband and drawstrings, ensures a comfortable and secure fit for these jogger pants.

CUSTOM INQUIRIES

Full custom orders for jogger pants are available for teams and clubs. If you are interested, please contact us.

SIZE

YS : 20 ~ 22inch

YM : 22 ~ 24inch

YL : 24 ~ 26inch

YXL : 26 ~ 28inch

Celly Hockey Story

If you’ve ever found yourself rummaging through your dad’s old boxes in the basement to find those classic retro snapbacks, you’re in the right place. These were the kind of hats that transported you back to a time where teams were named after Disney movies and aluminum sticks were the new norm. Those legendary designs inspired us to create something special: brand new hockey headwear with the same vintage vibe.

Celly Hockey Co. was born in 2020 when our founder, Kevin, turned his passion for hockey and retro styles into an online store. By fall, cellyhockeyco.com was live, and our mission was clear: to bring hockey players, teams, and fans the best vintage-inspired hats.

Whether you’re hitting the ice, or just hanging out, we’ve got the perfect headwear to help you celebrate your love for the game.

Shootout is the official distributor of Celly Hockey.

INFORMATION

This premium edge, exclusively distributed by MOSKITO HOCKEY, is designed for high-end ice tiles. It minimizes puck loss outside the rink and maximizes training efficiency.

Key Features

• Seamless Integration: Designed to fit perfectly with Hockey Synthetic Ice Tiles.

• Effective Puck Containment: The bumper-style edge keeps pucks within the rink, facilitating continuous play.

• Durability: High-quality materials suitable for both indoor and outdoor use, offering long-lasting stability.

• Easy Assembly and Portability: Simple installation and removal allow you to easily build or expand your rink in any space.

• All-Ages and All-Levels Compatible: Provides a consistent training boundary for players of all ages and skill levels.

INFORMATION

This foot mat is made from a highly flexible material, making it lightweight and easy to carry. It protects your skate blades from direct contact with the ground at the rink, on the bench, in the locker room, or even in the parking lot. Its compact, foldable design allows it to fit perfectly into any hockey bag, making it a convenient choice for both youth and adult players.

Features

• Foldable & Portable: Designed to fold easily for effortless transport and storage.

• Stay Clean & Dry: Provides a protective barrier against dirt and moisture while putting on or taking off your skates.

• Multi-Purpose Use: Ideal for various environments, including the rink, bench, locker room, and outdoors.

• Anti-Slip Surface: Offers a generous workspace with a textured surface to prevent slipping.

SPEC

Construction

Unfolded: 60 cm × 40 cm

Folded: 16 cm × 40 cm

※ Please note that a slight measurement tolerance of ±1–2 cm may occur depending on the measuring environment.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Crafted from a specialized plastic material balanced for durability and flexibility, this protector shields your blade from impact and abrasion across various surfaces. It is compatible with both left-handed and right-handed sticks and can be custom-cut to fit Senior, Intermediate, or Junior blades.

Features

• The world's most widely used hockey stick blade protection solution

• High durability and optimal flexibility thanks to specialized plastic material

• Cross-hatching texture along the blade line for enhanced grip and control

• Ultra-lightweight design to minimize any change in stick balance

• Built-in wear indicator: Easily identify when it’s time for a replacement

• Universal fit for LH/RH sticks; fits Senior, Intermediate, and Junior blades (customizable by cutting)

• Replicates an on-ice handling feel even during off-ice training

• Extends blade lifespan and expands the range of playable surfaces

GUIDE (HOW TO USE)

1. Clean the blade thoroughly and ensure it is completely dry.

2. Fit the product onto the blade and safely cut along the marking lines if necessary.

3. Ensure the edges are tightly secured to prevent the ends from lifting.

4. Regularly check the wear indicator to determine the appropriate time for replacement.

※ Not for consumption (Do not eat).

INFORMATION

This foot mat is made from a highly flexible material, making it lightweight and easy to carry. It protects your skate blades from direct contact with the ground at the rink, on the bench, in the locker room, or even in the parking lot. Its compact, foldable design allows it to fit perfectly into any hockey bag, making it a convenient choice for both youth and adult players.

Features

• Foldable & Portable: Designed to fold easily for effortless transport and storage.

• Stay Clean & Dry: Provides a protective barrier against dirt and moisture while putting on or taking off your skates.

• Multi-Purpose Use: Ideal for various environments, including the rink, bench, locker room, and outdoors.

• Anti-Slip Surface: Offers a generous workspace with a textured surface to prevent slipping.

SPEC

Construction

Unfolded: 60 cm × 40 cm

Folded: 16 cm × 40 cm

※ Please note that a slight measurement tolerance of ±1–2 cm may occur depending on the measuring environment.

INFORMATION

The essential training tool for perfecting your ice hockey stick handling. Practice your puck control with ease, whether you're at home or at a nearby park.

Features

• Skill Development: Ideal for improving fundamental stick handling and puck control techniques.

• Versatile Use: Suitable for both indoor and outdoor training.

• Simple Setup: Minimalist design for easy installation and convenient storage.

CONTENT

One Size (Training Aid). Please refer to the images below for detailed components.

※ Puck not included.