Brands

INFORMATION

Are you tired of tape marks and scratches inside your car? Keep your vehicle and sticks protected with our essential Hockey Stick Bag.


CONTENT

- Large Ring (Big Ring)

- Small Ring (Thin Ring)

- Sponge Grip

Colors: Red, Orange, Yellow, Green, Blue, White, Gray, Black

GUIDE

1. Choose your desired ring (Large or Small) or the sponge grip and slide it onto the top of the stick.
2. Slide the grip tube over the top, leaving a small amount of extra material hanging off the end as shown in the photo.
3. Pour hot water over the grip; it will shrink instantly. Proceed slowly while monitoring the shrinking process.
4. Shrink the very tip with hot water or trim any excess material if necessary for a clean finish.
5. If using a heat gun, maintain a distance of at least 1m (3ft). Apply heat gradually while watching the shrinkage.

* Install by shrinking the grip with hot water or a heat gun. Hairdryers are not recommended as they do not provide sufficient heat.

* Using a heat source too close can cause overheating, deformation, or scorching.

※ This is a DIY product and requires self-installation.

Note
Use hot water or a heat gun for proper installation.
Hairdryers are not recommended as they do not generate sufficient heat.

CONTENT

White & Black

SIZE

INFORMATION

Are you tired of tape marks and scratches inside your car? Keep your vehicle and sticks protected with our essential Hockey Stick Bag.


CONTENT

Available in two styles:

• Standard Bag: Fits up to 2 sticks

• Slim Bag: Fits 1 stick

* The Slim Bag is a limited-edition item and will not be restocked once the current inventory is sold out.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: Large 22 cm (W) × 22 cm (H)
(Standard 18cm × 18cm)




CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

YOUTH ~ 1.0 (Length: approx. 27 cm)

JUNIOR 1.0 ~ 5.0 (Length: approx. 32 cm)

SENIOR 6.0 ~ (Length: approx. 37 cm)

CAUTION: Please make sure to check your skate blade length before purchasing.

Simply cut to size to fit your skates.

INFORMATION
Simply stretch the guard slightly to fit your skates.

If necessary, cut it to match your skate length before use.

COLOR: Blue, Red, Green, Purple, Deep Pink, Orange, Yellow, Black, L.Pink

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)


CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)


CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

NOTE
The bottom text (ICE or SNOW) will be sent at random. (Carabiner included)

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

NOTE
The bottom text (ICE or SNOW) will be sent at random. (Carabiner included)

INFORMATION

Designed to easily remove ice buildup from the blades after skating.

Includes a carabiner and a retractable reel lead.

Easily clip it to your bag with the carabiner!

SPEC
- Composition: Dual-layered structure with a printed front and a terry back
- Size: 18 cm (W) × 18 cm (H)

CONTENT

- Skate Blade Towel
- Carabiner and Retractable Reel Lead (Badge Holder)

HOW TO USE

Use the printed front side to remove ice,
and finish by wiping any remaining moisture with the terry (towel) fabric on the back.

SIZE

INFORMATION

This is the Moskito Signature Patch, designed for the front Velcro zone of the Moskito Wheel Bag.

INFORMATION

A limited-edition ice hockey bag created through a collaboration between DIMITO® and MOSKITO®.

Features

• Spacious & Lightweight: Ample storage space without the extra bulk.

• Breathable Design: Constructed with materials and a structure optimized for ventilation to keep gear fresh.

• Water-Resistant Fabric: Made with water-resistant material, making it perfect for both hockey and daily sports use.

• Front Velcro Panel: Customize your bag with team logos or embroidered patches. (Note: Example patches are not included.)

• Drawstring Top: The top of the bag can be securely cinched and tied.

SPEC
- Weight: Approx. 3.3 kg
- Materials
Outer 1: 100% Nylon
Outer 2: 100% Polyester

- Model: 11 years old

- High Capacity
Fits a full set of Grade 4 equipment: Hockey Skates, Hockey Pants, Elbow Pads, Shin Guards, Gloves, Shoulder Pads (Chest Protector), Jogger Pants, Socks, Jersey, Water Bottle, Helmet, and a Dressing Mat

- Internal Pocket: Convenient storage for small essentials like hockey tape and scissors.

INFORMATION

PVC removable stickers perfect for your car, laptop, iPad, and more.

SPEC
• Size: Approx. 10.5 cm (W) × 8 cm (H)
• Material: PVC (Removable)

INFORMATION

PVC removable stickers perfect for your car, laptop, iPad, and more.

SPEC
• Size: Approx. 7.5 cm (W) × 9.5 cm (H)
• Material: PVC (Removable)

INFORMATION

PVC removable stickers perfect for your car, laptop, iPad, and more.

SPEC
• Size: Approx. 8 cm (W) × 9 cm (H)
• Material: PVC (Removable)

GUIDE

• Surface Preparation: Clean the surface of any dust or oils and ensure it is completely dry before applying the sticker.

• Adhesion Tips: Please note that adhesion may be weaker on curved, silicone, non-stick, or rough-textured surfaces.

• Removal: Peel off slowly starting from the corner. In cold environments, using the low heat of a hair dryer makes removal easier and cleaner.

• Product Care: Avoid rubbing the printed surface forcefully or letting it come into contact with sharp objects.

NOTE

• Exchanges & Returns: Due to the nature of consumable stickers, exchanges or returns may not be possible if there are signs of use or if an application error has occurred.

• Color Disclaimer: Printed colors may vary slightly depending on your monitor or mobile device’s resolution and brightness settings.

INFORMATION

PVC removable stickers perfect for your car, laptop, iPad, and more.

SPEC
• Size: Approx. 8 cm (W) × 9 cm (H)
• Material: PVC (Removable)

GUIDE

• Surface Preparation: Clean the surface of any dust or oils and ensure it is completely dry before applying the sticker.

• Adhesion Tips: Please note that adhesion may be weaker on curved, silicone, non-stick, or rough-textured surfaces.

• Removal: Peel off slowly starting from the corner. In cold environments, using the low heat of a hair dryer makes removal easier and cleaner.

• Product Care: Avoid rubbing the printed surface forcefully or letting it come into contact with sharp objects.

NOTE

• Exchanges & Returns: Due to the nature of consumable stickers, exchanges or returns may not be possible if there are signs of use or if an application error has occurred.

• Color Disclaimer: Printed colors may vary slightly depending on your monitor or mobile device’s resolution and brightness settings.

INFORMATION

PVC removable stickers perfect for your car, laptop, iPad, and more.

SPEC
• Size: Approx. 9 cm (W) × 10 cm (H)
• Material: PVC (Removable)

GUIDE

• Surface Preparation: Clean the surface of any dust or oils and ensure it is completely dry before applying the sticker.

• Adhesion Tips: Please note that adhesion may be weaker on curved, silicone, non-stick, or rough-textured surfaces.

• Removal: Peel off slowly starting from the corner. In cold environments, using the low heat of a hair dryer makes removal easier and cleaner.

• Product Care: Avoid rubbing the printed surface forcefully or letting it come into contact with sharp objects.

NOTE

• Exchanges & Returns: Due to the nature of consumable stickers, exchanges or returns may not be possible if there are signs of use or if an application error has occurred.

• Color Disclaimer: Printed colors may vary slightly depending on your monitor or mobile device’s resolution and brightness settings.

INFORMATION

PVC removable stickers perfect for your car, laptop, iPad, and more.

SPEC
• Size: Approx. 11 cm (W) × 7 cm (H)
• Material: PVC (Removable)

GUIDE

• Surface Preparation: Clean the surface of any dust or oils and ensure it is completely dry before applying the sticker.

• Adhesion Tips: Please note that adhesion may be weaker on curved, silicone, non-stick, or rough-textured surfaces.

• Removal: Peel off slowly starting from the corner. In cold environments, using the low heat of a hair dryer makes removal easier and cleaner.

• Product Care: Avoid rubbing the printed surface forcefully or letting it come into contact with sharp objects.

NOTE

• Exchanges & Returns: Due to the nature of consumable stickers, exchanges or returns may not be possible if there are signs of use or if an application error has occurred.

• Color Disclaimer: Printed colors may vary slightly depending on your monitor or mobile device’s resolution and brightness settings.

INFORMATION

PVC removable stickers perfect for your car, laptop, iPad, and more.

SPEC
• Size: Approx. 10 cm (W) × 7 cm (H)
• Material: PVC (Removable)

GUIDE

• Surface Preparation: Clean the surface of any dust or oils and ensure it is completely dry before applying the sticker.

• Adhesion Tips: Please note that adhesion may be weaker on curved, silicone, non-stick, or rough-textured surfaces.

• Removal: Peel off slowly starting from the corner. In cold environments, using the low heat of a hair dryer makes removal easier and cleaner.

• Product Care: Avoid rubbing the printed surface forcefully or letting it come into contact with sharp objects.

NOTE

• Exchanges & Returns: Due to the nature of consumable stickers, exchanges or returns may not be possible if there are signs of use or if an application error has occurred.

• Color Disclaimer: Printed colors may vary slightly depending on your monitor or mobile device’s resolution and brightness settings.

SIZE

The sizes in parentheses are recommended based on age/category.

- 20" (Youth)

- 22" (Junior)

- 24" (Intermediate)

- 26" (Senior)

Example: For a 5th grader taller than average, 24" is recommended

(especially if shin guard size is 12" or larger)

Tip: Check your current hockey socks and compare them with the actual size chart below.

SIZE CHART

* Measurement B is flexible (stretchable material).

NOTE

• All products feature the MOSKITO logo.

• The logo is located at the top center.
  

• Logo colors vary by product; please check the options for color details.
  

Product details are coming soon.

SIZE

The sizes in parentheses are recommended based on age/category.

- 20" (Youth)

- 22" (Junior)

- 24" (Intermediate)

- 26" (Senior)

Example: For a 5th grader taller than average, 24" is recommended

(especially if shin guard size is 12" or larger)

Tip: Check your current hockey socks and compare them with the actual size chart below.

SIZE CHART

* Measurement B is flexible (stretchable material).

NOTE

• All products feature the MOSKITO logo.

• The logo is located at the top center.
  

• Logo colors vary by product; please check the options for color details.
  

INFORMATION

This short sleeve t-shirt features a "Lone Player" graphic.

MATERIAL
95% Cotton / 5% Polyester

SIZE

INFORMATION

Rewrite hockey history with a bold “Hockey King” graphic tee.

MATERIAL
95% Cotton / 5% Polyester

SIZE

INFORMATION

This short sleeve t-shirt features a graphic of a dog wearing a hockey helmet.

MATERIAL
95% Cotton / 5% Polyester

SIZE