All Sticks

Ultra Low Kick Point

CCM Size Guide

10 FLEX: Approx. 122cm

20 FLEX: Approx. 131cm

30 FLEX - Approx. 138cm

40 FLEX - Approx. 146cm

50 FLEX - Approx. 151cm

55 FLEX - Approx. 158cm

65 FLEX - Approx. 170cm

75 FLEX - Approx. 170cm

80 FLEX - Approx. 170cm

* Measured from the floor, leaning against a wall.

GUIDE

Colors may vary depending on your monitor or mobile device settings.
The measurements listed above are average values and may vary slightly by product.

Ultra Low Kick Point

CCM Size Guide

10 FLEX: Approx. 122cm

20 FLEX: Approx. 131cm

30 FLEX - Approx. 138cm

40 FLEX - Approx. 146cm

50 FLEX - Approx. 151cm

55 FLEX - Approx. 158cm

65 FLEX - Approx. 170cm

75 FLEX - Approx. 170cm

80 FLEX - Approx. 170cm

* Measured from the floor, leaning against a wall.

GUIDE

Colors may vary depending on your monitor or mobile device settings.
The measurements listed above are average values and may vary slightly by product.

Ultra Low Kick Point

CCM Size Guide

10 FLEX: Approx. 122cm

20 FLEX: Approx. 131cm

30 FLEX - Approx. 138cm

40 FLEX - Approx. 146cm

50 FLEX - Approx. 151cm

55 FLEX - Approx. 158cm

65 FLEX - Approx. 170cm

75 FLEX - Approx. 170cm

80 FLEX - Approx. 170cm

* Measured from the floor, leaning against a wall.

GUIDE

Colors may vary depending on your monitor or mobile device settings.
The measurements listed above are average values and may vary slightly by product.

MID KICKPOINT

CCM Size Guide

10 FLEX: Approx. 122cm

20 FLEX: Approx. 131cm

30 FLEX - Approx. 138cm

40 FLEX - Approx. 146cm

50 FLEX - Approx. 151cm

55 FLEX - Approx. 158cm

65 FLEX - Approx. 170cm

75 FLEX - Approx. 170cm

80 FLEX - Approx. 170cm

* Measured from the floor, leaning against a wall.

GUIDE

Colors may vary depending on your monitor or mobile device settings.
The measurements listed above are average values and may vary slightly by product.

MID KICKPOINT

CCM Size Guide

10 FLEX: Approx. 122cm

20 FLEX: Approx. 131cm

30 FLEX - Approx. 138cm

40 FLEX - Approx. 146cm

50 FLEX - Approx. 151cm

55 FLEX - Approx. 158cm

65 FLEX - Approx. 170cm

75 FLEX - Approx. 170cm

80 FLEX - Approx. 170cm

* Measured from the floor, leaning against a wall.

GUIDE

Colors may vary depending on your monitor or mobile device settings.
The measurements listed above are average values and may vary slightly by product.

MID KICKPOINT

P29 + 1/4"

CCM Stick Length Guide

10 FLEX: Approx. 122cm

20 FLEX: Approx. 131cm

30 FLEX - Approx. 138cm

40 FLEX - Approx. 146cm

50 FLEX - Approx. 151cm

55 FLEX - Approx. 158cm

65 FLEX - Approx. 170cm

75 FLEX - Approx. 170cm

80 FLEX - Approx. 170cm

* Measured from the floor, leaning against a wall.

GUIDE

Colors may vary depending on your monitor or mobile device settings.

The measurements listed above are average values and may vary slightly by product.

Available in 18 Vibrant Colors. Style your blade with your favorite shades.

Color: Burgundy, Red, Orange, Neon Orange, Yellow, Neon Yellow, Neon Green, Green

Teal, Powder Blue, Blue, Navy Blue, Plum, Purple, Lavender, Pink, Neon pink, Grey

INFORMATION

Adjustick is a high-durability extension designed to increase the length of your hockey stick. It is easy to install and remove, and is fully compatible with carbon fiber sticks.

• Available Sizes: Junior / Intermediate / Senior

• 8-Step Adjustable Length: Ranges from approximately 1.25 cm to 10 cm (0.5" to 4").

• Superior Durability: Built to last and can be reused even after multiple stick changes.

• Easy Installation: Effortless setup and removal for maximum convenience.

INFORMATION

Protect your goalie stick shaft with the Twig Cover.

• How to Use: Slide it over the shaft and secure it firmly with hockey tape.

• Purpose: Protects the shaft from impact and friction while enhancing durability.

• Origin: Made in Denmark

The Paddle Wedge was created to address the recurring issue of finger and knuckle impacts that additional blocker padding simply couldn't solve. The core principle is to deflect the puck away, ensuring it never makes direct contact with these vulnerable areas.

The 2.0 model features a sloped design that guides the puck to glide upward and away. Its hollow-core construction makes it incredibly lightweight, ensuring it never feels bulky or burdensome during a game. Compared to its predecessor, the 2.0 is significantly more compact and streamlined.

Features

• Made in Denmark

• Easy to Attach and Remove

• Specialized Protection: Specifically engineered for fingers and knuckles (often referred to as "Paddle Finger").

INFORMATION

The Goalie Blok Pro is a goaltender-specific protective sleeve designed to prevent pucks from riding up the paddle and making contact with the fingers, specifically the index finger. Simply slide it around the stick paddle and position it for the most effective coverage.

This upgraded version features a more robust material, providing unwavering reliability on the ice. It has passed force tests of up to 110 mph and tear-resistance testing, while being approximately 7g lighter than the original Goalie Blok. Additionally, a 1.5mm durability layer has been added to provide stable protection against stick edge impacts and direct high-velocity shots.

Key Features

• Passed force testing up to 110 mph

• Features an additional 1.5mm durability layer

• Made in Canada

• Approximately 7g lighter than the previous model

• Slides around the paddle with adjustable positioning

ABOUT BRAND

The founder and inventor of Goalie Blok, Guy St. Vincent, repeatedly suffered finger injuries early in his goaltending career from pucks riding up the paddle. To solve this problem, he spent years in development before introducing the Goalie Blok prototype in 2018, which immediately caught the attention of goaltenders worldwide. Since then, the product has undergone continuous improvement to become today's Goalie Blok Pro. With a clear goal of solving real-game problems, we provide practical protective solutions that help goaltenders of all levels play with confidence. Goalie Blok is a brand symbolized by resilience and ingenuity. Protecting the future of the sport and maintaining the trust of goaltenders—that is Goalie Blok.

INFORMATION

2 Colors

Black (2.3 cm), White (2.4 cm)

SIZE

24mm x 30m

INFORMATION

Made of stretchable material, the top features mesh in the underarms and back, while the bottoms feature a snug waistband and mesh in the crotch area to enhance breathability and mobility.

SPEC
12.7 mm × 9.14 mm

HOW TO USE

1. Wipe away any dust or debris from the top of the shaft (butt-end).

2. Wind the tape uniformly until you reach your desired thickness, ensuring a smooth finish without unintended overlapping.

3. Press down firmly to secure the edge. For a professional finish, complete with grip tape or an end cap if needed.

Pro Tips

- The slim profile allows for micro-adjustments to your knob’s thickness and shape.

- Create spiral or ring patterns tailored to your hand for a consistent, "locked-in" grip every time.

- For the best performance, completely remove old tape and residue before reapplying a fresh wrap.

INFORMATION

Short grip length: approximately 11cm (4.3 inches)

HOW TO INSTALL

For installation instructions, please refer to the video link provided below.

https://youtu.be/MBapUWDNQvc?si=pkosstKLL6K6N3G-

Designed for exceptional control and comfort, the Snipe Grip features a hexagonal textured surface that provides superior grip and stability. This rubber grip is the perfect alternative to traditional hockey tape, offering an enhanced feel and a consistently secure, comfortable fit. Suitable for players of all levels, this grip delivers the confidence and performance needed to elevate your game.

Key Features

• Innovative Slip-On Rubber: Easy to install and durable.

• Hexagonal Texture: Engineered for precise grip and maximum control.

• Customizable Length: Includes integrated cut lines to personalize your grip length.

• Installation Kit Included: Comes with everything you need for a quick setup.

• Anti-Slip Performance: Maintains a firm hold in all conditions.

• Universal Fit: Designed to fit all hockey stick sizes and models.

SPEC

• Length: 212mm / 8.35"

• Weight: 32g / 1.15oz

• Official Licensed Product of the National Hockey League®

HOW TO USE

Installation Guide

Before installation, remove your old grip and thoroughly clean the hockey stick.

STEP 1 Spray the included installation liquid 3–4 times inside the grip. Rotate and twist the grip as you spray to ensure the interior is evenly coated. Do not spray the outside of the grip.

STEP 2 Place the grip on a flat surface and roll it while pressing firmly. This ensures the installation liquid is distributed uniformly across the entire interior.

STEP 3 Apply the installation liquid to the entire handle area of the hockey stick where the grip will be positioned.

STEP 4 Slide the grip onto the stick. Align the grip with the top edge of the stick and push the opposite end inward.

STEP 5 Push the grip all the way to the top of the stick. Twist the stick and the grip in opposite directions to adjust it to its final, secure position.

* Allow to dry for at least 12 hours.

* Using a hair dryer on LOW HEAT can help speed up the drying process.

Cleaning Guide

Gently wipe with a soft cloth and mild soapy water to remove any residue.

Designed for exceptional control and comfort, the Snipe Grip features a hexagonal textured surface that provides superior grip and stability. This rubber grip is the perfect alternative to traditional hockey tape, offering an enhanced feel and a consistently secure, comfortable fit. Suitable for players of all levels, this grip delivers the confidence and performance needed to elevate your game.

Key Features

• Innovative Slip-On Rubber: Easy to install and durable.

• Hexagonal Texture: Engineered for precise grip and maximum control.

• Customizable Length: Includes integrated cut lines to personalize your grip length.

• Installation Kit Included: Comes with everything you need for a quick setup.

• Anti-Slip Performance: Maintains a firm hold in all conditions.

• Universal Fit: Designed to fit all hockey stick sizes and models.

SPEC

• Length: 212mm / 8.35"

• Weight: 32g / 1.15oz

• Official Licensed Product of the National Hockey League®

HOW TO USE

Installation Guide

Before installation, remove your old grip and thoroughly clean the hockey stick.

STEP 1 Spray the included installation liquid 3–4 times inside the grip. Rotate and twist the grip as you spray to ensure the interior is evenly coated. Do not spray the outside of the grip.

STEP 2 Place the grip on a flat surface and roll it while pressing firmly. This ensures the installation liquid is distributed uniformly across the entire interior.

STEP 3 Apply the installation liquid to the entire handle area of the hockey stick where the grip will be positioned.

STEP 4 Slide the grip onto the stick. Align the grip with the top edge of the stick and push the opposite end inward.

STEP 5 Push the grip all the way to the top of the stick. Twist the stick and the grip in opposite directions to adjust it to its final, secure position.

Allow to dry for at least 12 hours.

Using a hair dryer on LOW HEAT can help speed up the drying process.

Cleaning Guide

Gently wipe with a soft cloth and mild soapy water to remove any residue.

INFORMATION

Designed for exceptional control and comfort, the Snipe Grip features a hexagonal textured surface that provides superior grip and stability. This rubber grip is the perfect alternative to traditional hockey tape, offering an enhanced feel and a consistently secure, comfortable fit. Suitable for players of all levels, this grip delivers the confidence and performance needed to elevate your game.

Key Features

• Innovative Slip-On Rubber: Easy to install and durable.

• Hexagonal Texture: Engineered for precise grip and maximum control.

• Customizable Length: Includes integrated cut lines to personalize your grip length.

• Installation Kit Included: Comes with everything you need for a quick setup.

• Anti-Slip Performance: Maintains a firm hold in all conditions.

• Universal Fit: Designed to fit all hockey stick sizes and models.

SPEC

• Length: 212mm / 8.35"

• Weight: 32g / 1.15oz

• Official Licensed Product of the National Hockey League®

HOW TO USE

Installation Guide

Before installation, remove your old grip and thoroughly clean the hockey stick.

STEP 1 Spray the included installation liquid 3–4 times inside the grip. Rotate and twist the grip as you spray to ensure the interior is evenly coated. Do not spray the outside of the grip.

STEP 2 Place the grip on a flat surface and roll it while pressing firmly. This ensures the installation liquid is distributed uniformly across the entire interior.

STEP 3 Apply the installation liquid to the entire handle area of the hockey stick where the grip will be positioned.

STEP 4 Slide the grip onto the stick. Align the grip with the top edge of the stick and push the opposite end inward.

STEP 5 Push the grip all the way to the top of the stick. Twist the stick and the grip in opposite directions to adjust it to its final, secure position.

Allow to dry for at least 12 hours.

Using a hair dryer on LOW HEAT can help speed up the drying process.

Cleaning Guide

Gently wipe with a soft cloth and mild soapy water to remove any residue.

"Don’t change the way you tape. Change the tape you use!"
Featuring a non-slip DSP (Durasoft Polymer) texture and a full adhesive backing, this grip provides both a secure hold and reduced wear on your glove palms. Engineered for a consistent feel, it is compatible with all hockey sticks.

SPEC
Length: 99 cm (39 in) – includes pre-cut ends for a perfect fit
Thickness: 0.5 mm
Official Licensed Product of the NHL®
Universal Compatibility: Fits all hockey sticks
Reduced Palm Wear: Extends the life of your goalie/player gloves
Anti-Slip Texture: Enhanced control in all conditions
Full Adhesive Backing: For a secure, long-lasting bond
Finishing Strips Included

NOTE
Actual color and texture may vary depending on your monitor settings.

"Don’t change the way you tape. Change the tape you use!"

Featuring a non-slip DSP (Durasoft Polymer) texture and a full adhesive backing, this grip provides both a secure hold and reduced wear on your glove palms. Engineered for a consistent feel, it is compatible with all hockey sticks.

Key Features
Top Cap This piece provides a clean, professional finish to the top of your stick. This should be the first piece applied to your stick.

Hexagonal Pattern The repeating hexagonal texture ensures a consistent grip and feel, no matter where your hand lands on the stick.

Finishing Strip Used to secure the end of your wrap for a perfect finish. The blank white ID tab allows you to add a personal touch (such as your name or number).

SPEC
Length: 99 cm (39 in) – includes pre-cut ends for a perfect fit
Thickness: 0.5 mm
Official Licensed Product of the NHL®
Universal Compatibility: Fits all hockey sticks
Reduced Palm Wear: Extends the life of your goalie/player gloves
Anti-Slip Texture: Enhanced control in all conditions
Full Adhesive Backing: For a secure, long-lasting bond
Finishing Strips Included

HOW TO INSTALL
For the best results, please refer to our installation video.
Clean and dry your stick handle completely. Starting from the butt end (top), wrap downward while maintaining constant tension and ensuring a uniform overlap.

NOTE
Actual color and texture may vary depending on your monitor settings.

• 1.5" x 10yd

• Self-adhering

• Thin for enhanced feel

• Coarse abrasive grip

• Made in USA

• Anti-Slip Grip – The textured surface enhances control and reduces slippage, even in high-moisture environments.

• 1.1mm Thickness – Provides an optimal feel and touch without adding extra bulk.

• Full Adhesive Backing – Ensures a firm, long-lasting bond to your stick.

• Length: 1.1 Yards (100cm) – Perfect coverage for handles or any custom setup.

• Residue-Free Removal – Peels off cleanly when it's time for a replacement.